Brands Hatch Tyre Pressure Guide
Short lap, big elevation changes and loaded corners mean pressures can come up quickly despite the lap being compact.
Pressure gain at Brands Hatch
There is no single cold PSI that works for every car at Brands Hatch. The right answer depends on tyre, car weight, drivetrain, alignment, driver pace and weather. Use cold pressure as the starting point and hot pressure as the result you tune around.
What to watch
- Check pressures immediately after a proper run, before the tyres cool.
- Compare front and rear pressure gain rather than only looking at one tyre.
- Make notes about traffic, session length and whether the lap was representative.
Typical hot pressure targets
Most road-legal track tyres and semi-slicks tend to work somewhere in the high-20s to low-30s PSI hot. Start conservative, then let the car tell you what it wants.
Suggested paddock workflow
- Set a calculated cold baseline.
- Run several representative laps.
- Measure hot pressures as soon as you stop.
- Bleed to target hot pressure.
- Record the session so your next visit starts closer.
Tip: If the car feels good early in the session and then loses bite, check whether the tyres have gone beyond their useful hot pressure window.
Use the track tyre pressure calculator