Yokohama AD08RS Tyre Pressures
Durable fast road and track-day tyre. It often works best with a slightly broader hot-pressure window than an A052.
Typical starting point: aim for around 30–33 PSI hot, then adjust from real hot readings taken immediately after a representative session.
Typical hot pressure window
For most track-day cars, Yokohama AD08RS pressures normally end up somewhere around 30–33 psi hot. Lighter cars may work slightly lower, while heavier or road-based performance cars often need a little more support.
Cold starting pressure
Do not copy somebody else's cold pressure blindly. Start with the calculator, allow for ambient temperature, session length and car weight, then check the tyre as soon as you come in.
Signs the pressure is too high
- The car starts well but becomes skatey or greasy after several laps.
- The middle of the tyre works harder than the shoulders.
- Grip drops away even though the tyre still has plenty of tread.
Signs the pressure is too low
- The car feels lazy on turn-in.
- The shoulder rolls over excessively.
- The tyre overheats because it is moving around too much.
Recommended workflow
- Choose a target hot pressure.
- Set a sensible cold pressure before the session.
- Run 3–4 representative laps.
- Measure immediately in the paddock.
- Bleed or add air and record the result.
Quick reference
| Use case | Guide |
|---|---|
| Dry track day | 30–33 PSI hot |
| Wet or low grip | Often 1–2 PSI higher hot, depending on tyre and car |
| Heavy car | Watch shoulder wear and avoid running too low |
| FWD car | Fronts usually need checking first |